Cisco ASR 1002 Hardware Installation Manual page 50

Connecting Cisco 24 VDC Power Supply
Caution Do not install wire into the terminal block that has not had its insulation removed.
Figure 31: Cisco ASR 1002 Router +24 VDC Power Supply Lead Wire Inserted into Terminal Block
1
The follwing image shows the lead wire fully inserted.
Figure 32: Cisco ASR 1002 Router +24 VDC Power Supply Lead Wire Fully Inserted
1
Cisco ASR 1000 Series Router Hardware Installation Guide
50
Lead wire insulation
Fully-inserted lead wire
Cisco ASR 1002 Router Overview and Installation
2
—
Copper wire
—