Cisco ASR 1002 Hardware Installation Manual page 40

Connecting AC Input Power to Cisco ASR 1002 Router
a) Leave a small service loop in the AC power cord from the inlet and then secure the power cord through the AC power
supply handle as shown in the Connecting AC Input Power to Cisco ASR 1002 router image. Alternatively, proceed
to Step b.
Figure 23: Positioning Cisco ASR 1002 Router AC Power Supply and Cord in Slot 1
1
b) Take the power cord and run it below the handles of the right and left power supplies. Make sure the power cord is
hanging loose so that it will not be disconnected from the AC power inlet as shown in the following image.
Figure 24: Cisco ASR 1002 Router AC Power Supply in Slot 0 and Slot 1 With Power Cord
Cisco ASR 1000 Series Router Hardware Installation Guide
40
AC power cord
Cisco ASR 1002 Router Overview and Installation