Couplers; Accessories - Johannus LIVE User Manual

The displays show the appropriate stoplist depending on which organ is currently
being played. When you switch to a different pipe organ, the stoplist immediately
changes to match. As a result, the registers operate like the stoplist for the
Domkerk in Utrecht one moment and the stoplist for the Hofkirche in Dresden the
next.
4.6

Couplers

Manual couplers:
MANUAL I – MANUAL II (I-II):
Fully couples all keys of Manual I to Manual II.
MANUAL III – MANUAL II (III-II):
Fully couples all keys of Manual III to Manual II.
MANUAL III – MANUAL I (III-I):
Fully couples all keys of Manual III to Manual I.
Pedal couplers:
MANUAL I – PEDAL (I-P):
Fully couples all keys of Manual I to the Pedal.
MANUAL II – PEDAL (II-P):
Fully couples all keys of Manual II to the Pedal.
MANUAL III – PEDAL (III-P):
Fully couples all keys of Manual III to the Pedal.
The designation of the main registers vary from sample set, therefore the
couplers are indicated by roman numerals.
4.7

Accessories

Reeds Off (RO):
Reeds Off is a function to switch off all reed stops simultaneously. As long as this
piston is pressed, no reed stops can be activated. When this function is switched
off, the reed stops that were on are activated again. Activate the Reeds Off with
the RO-piston.
Sequence - and + (SEQ-, SEQ+):
Sequence is a function for sequential selecting capture memory locations.
1. Select a capture memory location to start.
(for example level 2, location 2)
2. Use the SEQ- or SEQ+ pistons to select the previous or next capture memory
location.
All Swells to Swell (S/S):
All Swells to Swell transforms the expression pedal for Manual III, to a swell pedal
for the whole organ. Activate the All Swells to Swell with the S/S-piston.
User Manual LiVE III
The contrast of the dynamic displays might reduce if the organ is inactive for an
extended period of time. When switching on the organ, the displays get back to
their original contrast.
13