Table of Contents
Advertisement
9.
Press the ENTER-piston to confirm and to return to the Key Volumes menu.
10. Press the MENU-piston three times to exit the Johannus Menu.
5.5.5
MIDI Config
MIDI is a protocol for communication between the organ and other devices, such
as PC, Johannus MIDI Sequencer+ or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any
MIDI channel (1-16).
The four parts of the programmable MIDI code are: Channel, MSB, LSB and Voice.
1.
Press the MENU-piston.
Use the - and + pistons to select the Organ Settings function on the
2.
display.
3.
Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the MIDI Config function on the
4.
display.
5.
Press the ENTER-piston. A question to select a MIDI stop to configure appears
on the display.
6.
Activate the MIDI stop which has to be configured. The settings of the
corresponding MIDI stop appear on the display. An pointer is located in front
of the value of the MIDI channel.
7.
Use the - and + pistons to select the desired MIDI channel.
8.
Press the ENTER-piston. The pointer jumps to the MSB value.
9.
Use the - and + pistons to select the desired MSB value.
10. Press the ENTER-piston. The pointer jumps to the LSB value.
11. Use the - and + pistons to select the desired LSB value.
12. Press the ENTER-piston. The pointer jumps to the Voice value.
13. Use the - and + pistons to select the desired Voice value.
14. Press the ENTER-piston. The selected configuration is now stored in memory.
The pointer jumps back to the MIDI channel location.
15. Press the MENU piston three times to exit the Johannus Menu.
5.5.6
Reset
The Reset function can be used to reset a number of setting per sample set to the
factory settings.
1.
Press the MENU-piston.
Use the - and + pistons to select the Organ Settings function on the
2.
display.
3.
Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the Reset function on the display.
4.
5.
Press the ENTER-piston. The available Reset functions appear on the display.
6.
Use the - and + pistons to select the desired reset procedure:
Crescendo default:
Cust. Temperament def.:
User Manual LiVE III
Resets the factory settings of the 20
steps of the crescendo pedal.
Resets the custom programmable
26
Advertisement
Table of Contents
