Opening The Server; Removing The Left-Side Panel - Acer Altos G530 Series User Manual

Opening the server

Caution! Before you proceed, make sure that you have turned
off the system and all peripherals connected to it. Read the "Pre-
installation instructions" on page 35.
You need to open the server before you can install additional
components. The front bezel and left-side panel are removable to
allow access to the system's internal components. Refer to the
following sections for instructions.

Removing the left-side panel

1 Observe the ESD precautions and pre-installation instructions
described on page 35.
2 Remove the left-side panel.
(1) Remove the two screws located on the rear edge of the left-
side panel (1).
(2) Press the left-side panel release button (2).
(3) Slide the left-side panel toward the rear of the chassis (3).
37