Usb Mass Storage Device Configuration - Acer Altos G530 Series User Manual

98
Parameter
USB 2.0
Controller
USB 2.0
Controller
Mode
USB Mass
Storage Device
Configuration

USB Mass Storage Device Configuration

The USB Mass Storage Device Configuration submenu lets you specify
settings for a USB mass storage device, such as a USB CD-ROM,
CD-ROM/RW, DVD combo drive, and hard disk drives.
Parameter
USB Mass
Storage Reset
Delay
Device #1
Emulation
Type
Description
Enables the USB 2.0 controller.
Sets the transfer rate at HiSpeed (480
Mbps) or FullSpeed (12 MBps).
Lets you specify the settings of the USB
mass storage class devices.
Press Enter to access the USB Mass
Storage Device Configuration submenu.
Description
Select the number of seconds POST waits
for the USB mass storage device after the
start unit command.
Type of USB mass storage device.
When set to Auto, USB mass storage
devices with less than 530 MB will be
emulated as a floppy and the remaining
drives are hard drives.
The Forced FDD option can be used to
force a formatted HDD to boot as a FDD.
4 BIOS setup
Option
Enabled
Disabled
HiSpeed
FullSpeed
Option
20 Sec
10 Sec
30 Sec
40 Sec
Auto
Floppy
Forced FDD
Hard Disk
CD-ROM