Setting The Administrator/User Password - Acer Altos G530 Series User Manual

Parameter
User Access
Level
Clear User
Password
Fixed Disk
Boot Sector
Protect
Password On
Boot
NMI Control

Setting the Administrator/User password:

1 Use the up/down keys to highlight a password parameter
(Administrator Password or User Password) then press Enter.
A password box will appear.
2 Type a password then press Enter.
The password may consist of up to six alphanumeric characters
(A-Z, a-z, 0-9).
3 Retype the password to verify the first entry then press Enter
again.
After setting the password, the system automatically sets the
chosen password parameter to Installed.
Description
When set to Full Access, allows access to
any field in the BIOS setup utility.
When set to No Access, user is not
allowed to access the BIOS setup utility.
When set to View Only, allows access to
the BIOS setup utility but fields cannot
be changed.
When set to Limited, allows access to
Date and Time in the BIOS setup utility.
Clears the User password.
Note: This parameter is grayed out
when the Administrator password is not
set.
Enable or disables Boot Sector Virus
Protection.
Select Enabled to activate security check
during POST.
Enables or disables NMI control.
111
Option
Full Access
No Access
View Only
Limited
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled