Acer Altos G530 Series User Manual page 140

130
Network status indicator does not light.
Do the following:
• Check the cabling and network equipment to make sure that all
cables are properly connected.
• Reinstall the network drivers.
• Try another port or hub on the switch.
Network activity indicator does not light.
Do the following:
• Make sure the correct network drivers are loaded on the system.
• Network might be idle. Try accessing the server.
Server hangs when the drivers are loaded.
• Change the PCI interrrupt settings.
External device connected to a USB connector does not work.
Do the following:
• Reduce the number of external devices connected to a USB hub.
• Refer to the documentation that comes with the device.
There is problem with the application software.
Do the following:
• Verify that the software is properly configured for the system.
Refer to the software installation and operation documentation
for instructions on setting up and using the software.
• Try a different version of the software to see if the problem is with
the copy you are using.
• Make sure all cables are properly connected.
• If other software runs correctly on the system, contact your vendor
about the defective software.
5 Troubleshooting