Installing The System Into The Rack - Acer Altos G530 Series User Manual

158

Installing the system into the rack

Caution! To minimize the chances of injuries, make sure that two
or more people help in installing the server.
To install the system into a four-post rack
1 Remove the foot stands from the server.
(1) Lay the server on its side on a flat, stable surface (1).
(2) Remove the screws that hold the foot stands to the bottom of
the chassis (2). Keep these for later use.
(3) Pull the stands from the server.
Appendix B: Acer Altos G530 rack installation guide