Vivax ACP-09CH25AEMI User Manual page 195

VIVAX
Troubleshooting
When troubles occur, please check the following points before
contacting a repair company.
Problem
Poor Cooling
Performance
Possible Causes
Temperature setting may be
higher than ambient room
temperature
The heat exchanger on the
indoor or outdoor unit is
dirty
The air filter is dirty
The air inlet or outlet of
either unit is blocked
Doors and windows are
open
Excessive heat is generated
by sunlight
Too many sources of heat in
the room (people,
computers, electronics, etc.)
Low refrigerant due to leak
or long-term use
SILENCE function is
activated(optional function)
Solution
Lower the temperature setting
Clean the affected heat
exchanger
Remove the filter and clean it
according to instructions
Turn the unit off, remove the
obstruction and turn it back on
Make sure that all doors and
windows are closed while
operating the unit
Close windows and curtains
during periods of high heat or
bright sunshine
Reduce amount of heat
sources
Check for leaks, re-seal if
necessary and top off
refrigerant
SILENCE function can lower
product performance by
reducing operating frequency.
Turn off SILENCE function.
ENG