Figure 45. Installing the converter with the 2.5-inch storage drive into the plastic bracket
6. Slide the plastic bracket with the new 2.5-inch storage drive into the front-access storage enclosure until
it snaps into position. Press the notch to secure the enclosure cover and lock the enclosure cover with
the key.
Figure 46. Installing the bracket with the 2.5-inch storage drive into the front-access storage enclosure
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 139.
Device in the Multi-drive Conversion Kit
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
The Multi-drive Conversion Kit (hereafter referred to as kit) might be equipped with either one or both of the
following components:
• Slim optical drive
• Internal storage drive (such as hard disk drive, solid-state drive, or hybrid drive)
Slim optical drive
To install or replace a slim optical drive in the kit, do the following:
.
Chapter 8
Hardware removal and installation
89