Front Audio And Usb Assembly - Lenovo ThinkStation P320 Hardware Maintenance Manual

Note: Your microprocessor socket and cover might look slightly different from the illustration.
Figure 103. Installing the microprocessor socket cover
3. Carefully check the four corners of the socket cover to ensure that the cover is seated securely.
4. Follow any additional instructions that are included with the replacement part you received.

Front audio and USB assembly

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the front audio and USB assembly, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 69.
2. Remove the front bezel. See "Front bezel" on page 70.
3. Locate the front audio and USB assembly. See "Computer components" on page 7.
4. Press the release tab
Figure 104. Pivoting the drive bay assembly upward
5. Disconnect the front audio and USB assembly cables from the system board. See "Parts on the system
board" on page 11.
Note: Ensure that you note the locations of the cables when you disconnect the cables from the system
board.
122
P320 Hardware Maintenance Manual
1 as shown and pivot the drive bay assembly upward.