2. Release the three plastic tabs on the top of the front bezel and pivot the front bezel outward to remove it
from the computer.
Figure 12. Removing the front bezel
3. To reinstall the front bezel, first align the three plastic tabs on the bottom of the front bezel with the
corresponding holes in the chassis. Then pivot the front bezel inward until it snaps into position.
Figure 13. Reinstalling the front bezel
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 139.
PCIe card
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
.
Chapter 8
Hardware removal and installation
71