Figure 66. Inserting tabs
6. Install a 2.5-inch internal storage drive into the bracket. See "2.5-inch internal storage drive" on page 94.
Replacing a 2.5-inch internal storage drive with a 3.5-inch internal storage drive
To replace a 2.5-inch internal storage drive with a 3.5-inch internal storage drive, do the following:
1. Ensure that the 2.5-inch internal storage drive is removed from the bracket. See "2.5-inch internal
storage drive" on page 94.
2. Remove three pins
Figure 67. Removing three pins
3. Release tabs
1
,
2
, and
1
3
and
into the corresponding slots
1
and install them into slots
1
and installing them into slots
3
from the corresponding slots.
2
.
2
.
Chapter 8
Hardware removal and installation
99