Lenovo ThinkStation P320 Hardware Maintenance Manual page 82

b. The heat sink is secured by two mounting studs. Pinch the clips of the studs inward
the studs upward
adapter 3 .
Figure 17. Removing the heat sink from the M.2 solid-state drive adapter
c. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch
outward to release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of the
M.2 slot.
Figure 18. Removing the M.2 solid-state drive
• If you are installing an M.2 solid-state drive, pull outward the handle of the retention latch in the M.2
solid-state drive adapter.
4. Ensure that a thermal pad is placed in position on the M.2 solid-state drive adapter.
74
P320 Hardware Maintenance Manual
2
to release the heat sink. Then, lift the heat sink off the M.2 solid-state drive
1 and push