Reverting To The Default Settings - Roland SK-50 Owner's Manual

10. REVERTING TO THE DEFAULT SETTINGS

By following the steps below, you can have all the settings in the SK-50 returned to their
original factory values. This is known as "initialization."
Performing an Initialization
1 While holding down the MASTER button, press "8" in the NUMBER buttons.
FAT
The message shown below will appear in the display, and the number 8 button will start
flashing.
2 With your finger still on the MASTER button, press the number "8" button once again.
For a list of all the values that are contained in the default settings, refer to the appendices in the
separate "Ensemble Volume" (
26
1
MASTER
p. 34).
2 3 4 5 6 7 8