Pitch Bend/Modulation - Roland SK-50 Owner's Manual

Setting the Reverb Depth (Level)
By changing the level (0—127), you can control the degree to which the Reverb effect is
applied.
Hold down the REVERB button, and press either UP or DOWN enough times to arrive at the
desired depth setting.
CHORUS
REVERB
* Note that even with a high value selected for this setting, you will not obtain the expected
amount of reverb if you have the Reverb Master Level (

PITCH BEND/MODULATION

You can alter the pitch of notes played on the keyboard by using your left hand to press the
black key at the extreme left end of the keyboard. While this key is pressed, the pitch is gently
shifted. It returns to normal pitch when you release the key. By slowly pressing and releasing the
key, the transition in pitch can be slowed down.
Turning the Pitch Bend/Modulation Feature ON/OFF
Press the PITCH BEND button, and confirm that its indicator is lit. Thereafter, the two black
keys at the keyboard's left extreme do not function as ordinary keys, but offer the Pitch
Bend/Modulation effects instead.
PITCH BEND
PART
DOWN
Pitch Bend
ピッチ・ベンド（ベン
Modulation
モジュレーション
KEY
TRANSPOSE
BANK
UP
VALUE
Extent to which Reverb is applied
p. 25) set to a fairly low level.
Additionally, the black key second from the left can be
pressed to apply tiny undulations to the sound's pitch to
obtain a vibrato effect. Press the key slowly, and the
effect will be minimal; press it more forcefully, and the
effect will be more pronounced.
19