Please Note While Programming - HEIDENHAIN TNC 640 User Manual

Hide thumbs Also See for TNC 640:

Table of Contents

Please note while programming:

Enter the Q204 2ND SET-UP CLEARANCE so that no

collision with the workpiece or the fixtures can occur.

If Q227 STARTNG PNT 3RD AXIS and Q386 END POINT

3RD AXIS are entered as equal values, the TNC will not

carry out the cycle (depth=0 programmed).

Program Q227 greater than Q386. Otherwise, the TNC

will display an error message.

Cycles: Special Functions | FACE MILLING (Cycle 232, DIN/ISO: G232)

HEIDENHAIN | User's manual for cycle programming | 10/2017