EVGA X299 DARK Owner's Manual page 11

EVGA X299 DARK (151-SX-E299)
1.
Power Button
2.
Reset Button
3.
Active BIOS ROM
4.
U.2 Enable/OK
5.
Skylake-X Only Memory Status
6.
Memory Status
7.
USB Type-C Status
8.
M.2 Key-E Status/Mode
1. Power Button
a. RED: Motherboard is turned on and running.
2. Reset Button
a. WHITE: Reset button will typically flash in conjunction with
HDD/SSD LED. Depending on load, the button may flash or appear
solid white at times.
b. NVMe SSDs cannot be read for the purposes of the Reset LED.
3. Active BIOS LED
a. WHITE: Active BIOS Chip (only 1 will be lit at a time)
4. U.2 Enable/OK
a. WHITE: Port is enabled.
b. GREEN: Port is connected to a working device.
c. OFF: No device is attached/Port is disabled.
5. Skylake-X Only Memory Status LEDs light up to show that a Skylake-X
processor is installed and/or when the memory/DIMM has failed POST
a. WHITE: Skylake-X CPU detected and slot is usable
b. RED: DIMM/Memory has failed POST
c. OFF: Kaby Lake-X CPU installed or unsupported memory in DIMMs.
6. Memory Status LEDs light up to show that a Kaby Lake-X or Skylake-X
processor is installed, and/or when the memory/DIMM has failed POST
a. WHITE: Kaby Lake-X or Skylake-X CPU detected
b. RED: DIMM/Memory has failed POST
7. USB Type-C Status
a. GREEN: Indicates device is attached and detected to USB Type-C.
b. OFF: No device detected.
8. M.2 Key-E 32mm LED
a. WHITE: M.2 Key-E slot enabled and M.2 Key-E device installed.
b. OFF: M.2 Key-E Slot disabled.
LED Legend
9.
PE1 Status/Mode
10.
PE2 Status/Mode
11.
PE3 Status/Mode
12.
PE4 Status/Mode
13.
PE5 Status/Mode
14.
PE6 Status/Mode
15.
M.2 Key-M 110mm Status/Mode
16.
M.2 Key-M 80mm Status/Mode
17.
CPU Malfunction Error
18.
CPU FIVR Power Error
19.
CPU Error
20.
+5V PSU Power
21.
Memory Power
22.
+5V Standby Power
23.
Multi-function POST indicator
- 11 -