Qos Engine - D-Link DIR-808L User Manual

Section 3 - Configuration
The QoS Engine option helps improve your network performance by prioritizing applications. By default the QoS Engine set-
tings are disabled and application priority is not classified automatically. The QoS section contains a queuing mechanism,
traffic shaping, and classification. It supports two kinds of queuing mechanisms: Strict Priority Queue (SPQ) and Weighted Fair
Queue (WFQ). SPQ will process traffic based on traffic priority; queue 1 has the highest priority and queue 4 has the lowest
priority. WFQ will process traffic based on the queue weight; you can configure each queue's weight, where the sum of all the
queues' weights must be 100. When surfing the Internet, the system will do traffic shaping based on the uplink and downlink
speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do QoS based on the
queue's priority or weight.
The following parameters will be available for configuration:
Enable QoS: This option is disabled by default. Enable this option for
better performance and experience with online games and
other interactive applications, such as VoIP.
Automatic
Tick this option to have the QoS engine automatically set
Uplink Speed:
your uplink speed.
Measured
Displays the uplink speed measured by the router.
Uplink Speed:
Manual Uplink
This section allows you to specify the speed at which data can
Speed:
be transferred from the ISP to the router. This is determined
by your ISP. ISPs often define speed as a download/upload
pair. For example, 1.5 Mbits/284 Kbits.
D-Link DIR-808L User Manual

QoS Engine

85