Table of Contents
Advertisement
Section 3 - Configuration
Enable.UPnP:
To use the Universal Plug and Play (UPnP) feature, click on
Enable UPnP. UPnP provides compatibility with networking
equipment, software and peripherals.
Enable.WAN.
Checking the box will allow the DIR-808L to respond to
Ping.Respond:
pings, which may be required by some ISPs. If not required,
unchecking the box may provide some extra security from
outside intruders.
WAN.Ping.
Choose whether to Allow.All or Deny.All WAN pings according
Inbound.Filter:
to the inbound filter rules determined under the Inbound
Filters section.
Details:
Displays the state of the WAN ping inbound filter.
WAN.Port.Speed:
You may set the port speed of the Internet port to 10.Mbps,
100.Mbps, or Auto (recommended).
Enable.IPV4.
Check the box to allow multicast traffic to pass through the
Multicast.Streams:
router from the Internet (IPv4).
Enable.IPV6.
Check the box to allow multicast traffic to pass through the
Multicast.Streams:
router from the Internet (IPv6).
D-Link DIR-808L User Manual
Advanced Network Settings
99
Advertisement
Table of Contents
