Wi-Fi Protected Setup Wizard - D-Link DIR-808L User Manual

Section 3 - Configuration

Wi-Fi Protected Setup Wizard

Wireless Settings: Wi-Fi Protected Setup Wizard
If your wireless clients support the W-Fi Protected Setup (WPS) connection method,
this wizard can be used to initiate a secure wireless connection between this device
and wireless clients with a simple click of the WPS button. The Wi-Fi Protected Setup
wizard is specially designed to assist basic network users with a simple, step-by-step
set of instructions to connect wireless clients to this router securely using the WPS
method.
To initiate the Wi-Fi Protected Setup wizard click on the Add.Wireless.Device.with.
WPS button.
Step.1: In this step there are two options to choose from. You can choose Auto if the
wireless client supports WPS, or Manual if the wireless client does not support WPS.
At any stage during this wizard, you can click on the Prev button to return to the
previous page, click on the Next button to continue to the next page, or click on the
Cancel button to discard the changes made and return to the main wireless page.
Step.2.-.Auto: After selecting Auto, the following page will appear. There are two
ways to add a wireless device which supports WPS. Firstly, the Personal Identification
Number (PIN) method will prompt you to enter the PIN code which was provided
with your wireless device. This PIN code should be identical on the wireless client.
Secondly, the Push Button Configuration (PBC) method will allow the wireless client
to connect to your router by pressing the WPS button on the client device.
Choose the preferred method of WPS and click on the Connect button to establish a
connection.
D-Link DIR-808L User Manual 43