Table of Contents
Advertisement
Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the time server. Daylight Saving can also be configured to
automatically adjust the time when needed.
Current.Router.
Displays the current date and time of the router.
Time:
Select your time zone from the drop-down menu.
Time.Zone:
To select Daylight Saving time manually, select enabled or
Enable.Daylight.
disabled, and enter a start date and an end date for daylight
Saving:
saving time.
NTP is short for Network Time Protocol. A NTP server will
Enable.NTP.
synchronize the time and date with your router. This will only
Server:
connect to a server on the Internet, not a local server. Check
the box to enable this feature.
Enter the IP address of a NTP server or select one from the
NTP.Server.Used:
drop-down menu.
To manually input the time, enter the values in these fields for
Date.and.Time:
the Year, Month, Day, Hour, Minute, and Second and then click
Set.Time.
Note: You can also click Copy.Your.Computer's.Time.Settings
to sync the date and time with the computer you are currently
on.
D-Link DIR-808L User Manual
Time
105
Advertisement
Table of Contents
