Table of Contents
Advertisement
Section 3 - Configuration
The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being configured. The following
configuration relates to the 5.GHz band.
Enable Wireless: Check the box to enable the wireless function at all times. If
you do not want to use wireless, uncheck the box to disable
all wireless functions. To set a schedule for the times when
you want the wireless network to be available, click on the
Add.New button to specify a new schedule.
Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID is
case-sensitive.
802.11 Mode: Here you can manually select the preferred frequency band
to use for this wireless network.
Enable Auto Channel
The auto channel selection setting can be selected to allow
Scan:
this device to choose the channel with the least amount of
interference.
Wireless Channel: If Auto Channel Scan is not enabled, you can manually select
a wireless channel. By default the channel is set to 36. The
channel can be changed to fit the channel setting for an ex-
isting wireless network or to customize the wireless network.
Transmission Rate: Select the transmission rate. It is strongly suggested to select
Best (Automatic) for best performance.
Channel Width: When using the 802.11n frequency band, you have an option
to choose between a 20 MHz, 20/40 MHz, or 20/40/80 MHz
bandwidth for 802.11ac.
Visibility Status: This option allows you to adjust the visibility of your SSID. If
Visible is selected, the SSID of your wireless network will be
visible to any wireless clients within range of the signal. If In-
visible mode is selected, clients must search for the SSID of
your wireless network manually in order to connect to the
network.
D-Link DIR-808L User Manual
Manual Setup - 5 Ghz Band
52
Advertisement
Table of Contents
