Positioning The Wbs24; Cell Overview; Figure 3.12 The Cell Boundary Of Wbs24 - Samsung OfficeServ 500 Service Manual

OfficeServ 500 Wireless LAN Service Manual/Ed.00
7

Positioning the WBS24

This section introduces the cell in where the WBS24 will be installed, and describes
the data transmission rate affected by the terminal's location.
7.1

Cell Overview

The Figure 3.10 below illustrates the wireless transmission range of the WBS24.
Theoretically, the range of a cell is presented as a circle, but in reality, the shape may
be altered depending on the surrounding environment such as the location of the
WBS24 or the surrounding structures.
The boundary of a cell normally indicates the frequency range of WBS24, but
actually, it should be perceived as a wireless service range and a boundary where a
hand-off function to another cell is possible.
The WIP-5000M is always connected to WBS24 within the cell range, and even
when the WIP500M is in an overlapped range between cells, the WIP500M
maintains communication with one cell at a particular time.
© SAMSUNG Electronics Co., Ltd.

Figure 3.12 The Cell Boundary of WBS24

CHAPTER 3. Installation
Cell Boundary
Page 3-13