Battery - VTech DS3111-2 Manual

Battery

After the battery is fully charged, you can expect the following performance:
Operation
While in use (talking)
While not in use (standby*)
*Handset is off the telephone base but not in use.
The battery needs charging when:
• A new battery is installed in the handset.
• The telephone beeps when taken off the telephone base.
• Battery indicator on the handset display is flashing.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
1. Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www. vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special
disposal instructions.
3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if swallowed.
4. Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets,
and keys. The battery and/or conductor may overheat and cause burns.
5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and
limitations specified in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.
DS3111-2 CIB 071607.indd 29
Operating time
8 hours
96 hours (4 days)
www.vtechphones.com
29
7/28/2007 5:55:48 PM