Answer An Incoming Call During An Intercom Call; Find Handset; Voicemail - VTech DS3111-2 Manual

Basic operation
Switch between external and internal calls (continued)
4. The originating handset screen displays CALLING HANDSET X.
The destination handset rings and displays HANDSET X IS CALLING.
5. Press INT on the originating handset to switch between the external call
(outside) and intercom call.

Answer an incoming call during an intercom call

• During an intercom call, there will be an alert tone to signify an incoming call.
• To answer the incoming call, press
intercom call will be ended automatically.
• To terminate the intercom call without answering the incoming call, press
OFF/CLEAR on the handset.

Find handset

This feature allows the telephone base to page all the handsets.
• Press FIND HANDSET on telephone base, all the handsets ring and the
screens display *PAGING*.
• To stop paging, press FIND HANDSET again on the telephone base,
/FLASH,
or any dialing keys (0-9,

Voicemail

If you subscribe to voicemail service and you have a new voicemail message,
the VOICEMAIL indicator on the telephone base will flash, the VOICEMAIL
button will be on and the handset will display NEW VOICE MAIL
Press VOICEMAIL button and the handset will dial to your local telephone
•
company directly.
• Use PLAY, SKIP or ERASE buttons to access various functions.
To setup the voicemail buttons, see Voicemail setup section on page 11.
Contact your local telephone company for more information about voicemail
service.
DS3111-2 CIB 071607.indd 15
/FLASH on the handset, and the
#
,
) on the handsets.
*
.
www.vtechphones.com
** PAGING **
• If the ringer volume
is turned off, the
handset will not ring
when you press
FIND HANDSET.
• Once the
VOICEMAIL button
is pressed,
CID
MENU/SELECT
buttons will be
disabled and they
will be replaced by
PLAY, ERASE and
SKIP respectively.
, and
15
7/28/2007 5:55:45 PM