Furuno VR3000 Instruction Manual page 25

Active:
Brand*:
Type No.*:
Check*:
Data Name*:
Input Type:
Sampling Data Bit:
Sampling Frequency: Displays Sampling Frequency.
Codec:
MIC Test Active M1/M3/M5: Put a checkmark when performing MIC Test of M1/M3/M5.
MIS Test Active M2/M4/M6: Put a checkmark when performing MIC Test of M2/M4/M6.
MIC M1/M3/M5 Position: Enter MIC position of MIC M1/M3/M5.
MIC M2/M4/M6 Position: Enter MIC position of MIC M2/M4/M6.
Threshold Level M1/M3/M5: Enter MIC test threshold level of MIC M1/M3/M5.
Threshold Level M2/M4/M6: Enter MIC test threshold level of MIC M2/M4/M6.
Equipment Category*: Set equipment category.
Board Name*:
Note*:
* Marked Items: For easy identification of input source, enter Equipment Category, Brand,
Type No., Date and Name.
Put check in check box to make channel active.
Enter and display brand name.
Set type no. (equipment name)
Do equipment check.
Enter data name.
Enter input type.
Displays sampling data bit rate.
Sets MIC type
Enter board names where channels are present.
Enter note.
23