Braking System Service Information - Honda XLR200R Service Manual

13. BRAKING SYSTEM
SERVICE INFORMATION ................................ 13-1
REMOVAL & INSTALLATION OF
TROUBLESHOOTING ...................................... 13 - 2
FRONT MASTER CYLINDER ........................... 13 - 6
DISMANTLING
&
ASSEMBLY OF
REPLACEMENT OF FRONT BRAKE PAD ......... 13 - 3
FRONT MASTER CYLINDER ........................... 13 - 7
REMOVAL & INSTALLATION OF
DISMANTLING & ASSEMBLY OF
FRONT BRAKE CALIPER ................................. 13 - 4
REAR BRAKE PANEl ...................................... 13 - B
DISMANTLING & ASSEMBLY OF
REMOVAL & INSTALLATION OF
FRONT BRAKE CALIPER ................................. 13 - 5
BRAKE PEDAL ................................................ 13 - 9
SERVICE INFORMATION·
• Do not allow oil or oil products to come in contact with the disc and pad because this can reduce braking
functions. In the
event
of such contact, replace pads and degrease brake disc.
• Do not allow oil or oil products to come in contact with the brake drum interior or lining surfaces. -In the event of such
contact, clean and _degrease the brake drum, and replace brake shoe.
When adding brake fluid, do not allow dirt or water to contaminate the reservoir.
Do not use/mix various brands of brake fluids .in order to pe\(ent chemical reactions.
Do not re-use brake fluid removed from the cylinder.
m
The brake fluid can damage the paint finish, plastic and rubber surfaces. Do not allow brake fluid to corne in contact with parts.
Do not re-use sealing washers.
Clean parts removed using brake fluid, pass compressed air through port to j::heck for clogging.
Once the hydraulic system has been operated or it has been disassembled, the system must be bleed.
Brake pad and shoe should be replaced as a set.
13-1