Engine Removal And Installation - Service Notes - Honda XLR200R Service Manual

6. ENGINE REMOVAL AND INSTALLATION
SERVICE INFORMATION .................................. 6 - 1 ENGINE REMOVAL AND INSTALLATION ........... 6 - 4
DRIVE SPROCKET ..................•......................... 6 - 2
SERVICE NOTES
When removing and installing engine, make sure that the vehicle is properly supported with a jack. Check that frame,
engine cables and harness are n'ot damaged in the process.
When following procedures and installing
the
engine, protect
the
frame
with
tape.
The following components can be serviced with the engine installed in the frame.
~
-AC Generator (<>14) -Carburetor (<>5)
~
-Clutch (<>9) -Starter Clutch
(~16)
-Gearshift Linkage (<>9) -Starter Motor (<>16)
-Pulse Generator (<>15)
The following components require engine removal for service.
-Cannecting Rod (<>10) -Crankshaft (<>10)
-Cyli~der
Head (<>7) -Cylinder, Piston (<>8)
-Shift Drum (<>10) -Transmission (<>10)
6-1