55103 - Could Not Open Files On The Options Diskette; 55104 - Error Updating The Options On The Cr 825/850 System; 55105 - Could Not Allocate Essential Memory; 55106 - The Options On This Diskette Are Already Enabled On This System - Kodak DirectView CR 825 Diagnostics Manual

DIAGNOSTICS
10DEC05

55103 - Could not open files on the Options Diskette

DG4825-1
Page
117 of 180 Cause:
Action:

55104 - Error updating the options on the CR 825/850 SYSTEM

Cause:
Action:

55105 - Could not allocate essential memory

Cause:
Action:

55106 - The Options on this diskette are already enabled on this system

Cause:
Action:

55107 - This Options Diskette has been used on another device

Description: The OPTIONS DISKETTE was used on another CR 825/850 SYSTEM
Cause:
Action:

55109 - Error occurred while trying to update the Options on the UNIT

Cause:
Action:
The file on the OPTIONS DISKETTE malfunctioned.
Install a new OPTIONS DISKETTE.
The database malfunctioned.
1. Run "C:\Services\AddOnInit.exe".
2. Install the OPTIONS DISKETTE again.
The memory was too low.
1. Boot the SYSTEM.
2. Install the OPTIONS DISKETTE again.
The options are available for use.
None.
before now.
The OPTIONS DISKETTE can be used for only one CR 825/850 SYSTEM.
Use the correct OPTIONS DISKETTE.
The correct configuration for this CR 825/850 SYSTEM was not provided.
1. Boot the SYSTEM.
2. Install the OPTIONS DISKETTE again.
Error Codes