Selecting The Paper Path (Bin 1 Or Bin 2) - Epson FX-890II User Manual

FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User's Guide
To install the double-bin cut-sheet feeder on your printer, see "Installing the cut-sheet feeder" on
page 124.

Selecting the paper path (bin 1 or bin 2)

When the double-bin cut-sheet feeder is installed, the high-capacity cut-sheet feeder becomes bin 1
and the single-bin cut-sheet feeder becomes bin 2 for paper path selection purposes.
It is best to select the paper path in your application program because software settings usually
override the printer's control panel settings. However, if you cannot select the paper path in your
application, select a path by pressing the Tear Off/Bin button until the light indicates the bin you want
as shown below.
O = On, N = Off, F = Flashing
The cut-sheet feeder you selected automatically loads paper when the printer receives data.
Options and Consumables 133