installation
|
12
GLASS FRONT
REMOVAL / INSTALLATION
1. Turn off stove and allow to return to room tem-
perature.
2. Lift off cast top and place on a soft surface.
3. Remove 2 bolts and lift off cast front - place front
carefully on a soft surface.
4. Slide the light assembly bracket out of the way.
12 |
Hampton® H15-10 Direct Vent Freestanding Gas Stove
5. Lift both latches securing glass door and
remove door.
6. To reinstall–reverse steps.
WALL THERMOSTAT
INSTALLATION
1. Open the front panel and remove the cover
plate by removing two screws.
2. Disconnect one of the wires from the switch
as shown, connect this wire to the thermostat.
3. Ensure switch is set to <ON> position.
4. Reinstall front panel.