Mercedes-Benz COMAND Operating Instructions Manual page 44

Importing/exporting data
42
Activating/deactivating PIN protec-
tion
Press the Ø button on the COMAND
X
control panel.
or
Press Vehicle Vehicle
X
The vehicle menu is displayed.
To select System Settings System
X
turn and press the controller.
A menu appears.
To select Data Data Import/Export
X
press the controller.
Select Activate PIN Protection Activate PIN
X
Activate O or deactivate ª PIN protec-
tion. When activating PIN protection, you
will be prompted to enter a PIN.
To enter the 4-digit PIN and select ¬:
X
turn and press the controller.
You will be prompted to enter the PIN
again.
Enter the PIN again and select ¬.
X
The PIN prompt now protects your personal
data from unwanted export.
in the main function bar.
Settings: slide 6,
Import/Export: turn and
Protection.
i If you deactivate your PIN protection, you
will first be prompted to enter your PIN. If
you have forgotten your PIN, an authorized
Mercedes-Benz Center can deactivate your
PIN protection for you. Alternatively, you
can deactivate PIN protection by resetting
your personal COMAND data
( page 43).
Y
Importing/exporting data
Insert the SD memory card (
X
or
Connect a USB device (e.g. a USB memory
X
stick) ( page 176).
Y
Press the Ø button on the COMAND
X
control panel.
or
Press Vehicle Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select System System Settings Settings: slide 6 and
X
press the controller.
A menu appears.
To select Data Import/Export Data Import/Export: turn and
X
press the controller.
Select Import Data Import Data
X
i
If you import data, such as address data,
the existing data on COMAND is overwrit-
ten. You will see a message to this effect.
COMAND is restarted after the data import.
page 175).
Y
or Export Export Data Data.