Mercedes-Benz COMAND Operating Instructions Manual page 29

The example shows the character entry when
you save a destination as a navigable contact
in the address book (
is located in the input line.
To select an input line: slide 6 and turn
X
the controller, then press it after selecting
4 or 5.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
Turn and press the controller.
X
To move the cursor: select the input line.
X
Slide 6 and turn the controller, then
X
press it after selecting 2 or 3.
To change the character bar language:
X
slide 6 and turn the controller, then
press it after selecting B.
A menu appears.
To select the language: turn and press the
X
controller.
The character set for the selected language
is set.
The character bar entry functions are listed in
the table.
Symbol Function
Ä Switches between digits and
symbols
* Switches the character bar to
uppercase/lowercase letters
B Changes the character bar lan-
guage
page 61). The cursor
Y
Character entry (navigation)
Symbol Function
F Deletes a character/an entry
è Switches to keyword search
( page 62)
Y
4, 5 Selects the input line
2, 3 Moves the cursor within the
input line
¬ Confirms an entry
& Cancels input
Entering characters using the number
keypad
Press one of the number keypad buttons,
X
e.g. l, once or repeatedly in quick suc-
cession.
The character appears at the bottom of the
display when the key is pressed. The first
available letter is highlighted.
You see which characters you can enter
with that key. Each time the key is pressed,
the next character is selected.
Wait until the character display goes out.
X
The entries matching your input are shown
in the list.
27