Mercedes-Benz COMAND Operating Instructions Manual page 211

To search for a location: select
X
Areas Areas: turn the controller and press to con-
firm.
Select Other States (U.S.) Other States (U.S.)
X
rent State/Province rent State/Province.
Depending on the selection, the list of
states or cities will appear with the charac-
ter bar. You can limit the search using the
character bar.
To select state/province or city: enter the
X
first few letters by turning and pressing the
controller.
To switch to the list without the character
X
bar: slide 5 or select
To delete an entry: select 2 in the char-
X
acter bar and press the controller.
Pressing briefly deletes the last letter
entered.
Pressing and holding longer deletes the
entire entry.
To select the state/province or city from
X
the list: turn and press the controller.
After selecting a state (or province) the list
of locations appears.
After selecting a location, the information
chart displays the weather forecast for the
selected location. The data is supplied by
the nearest weather station.
Option 2: selecting the area in the
weather map
Call up the weather map (
X
Move the weather map so that the cross-
X
hair is over the desired area (
Press the controller.
X
The information chart shows the weather
forecast for the selected area. The data is
supplied by the nearest weather station.
Search Search
or At Cur‐ At Cur‐
ok. ok
page 210).
Y
page 210).
Y
Weather forecasts
Memory functions
Storing the area in the weather memory
You can save locations that are called up fre-
quently in ten preset positions (0, 1-9) in the
weather memory.
In the weather memory: select the area
X
for the weather forecast (
The selected location appears at the top in
the status bar.
To select Location Location
X
chart: turn and press the controller.
Select Preset Preset.
X
Select a preset using the controller.
X
Press and hold the controller until you hear
X
a tone.
The area is entered on the selected preset.
To store rapidly: in the daily forecast
X
( page 207) press and hold a number key,
Y
e.g. l, until the preset position number
is shown in the status bar in front of the
area name.
i
You can also use this function in the five-
day forecast ( page 207), and in the
Y
detailed information view (
Selecting an area from the weather
memory
Directly from the weather memory:
X
select Location Location from the information
chart: turn and press the controller.
Select Preset. Preset
X
Select the memory position which contains
X
the location you require.
The weather data for the selected area is
displayed.
Quick select: if a location is stored in the
X
weather memory, for example when the
current forecast display is active, briefly
press a number key, e.g. l.
The weather data for the selected area is
displayed.
page 208).
Y
in the information
page 207).
Y
209