Mercedes-Benz COMAND Operating Instructions Manual page 28

Character entry (navigation)
26
Symbol Function
4, 5 Selects the input line
2, 3 Moves the cursor within the
input line
b Confirms an entry
% Cancels input
S Inserts a paragraph
Entering characters using the number
keypad
If an input line for text or numbers is selected,
the number keypad is used for the character
entry.
For example, to enter the letter
X
l number key briefly three times in suc-
cession.
An additional display area is shown with all
the available characters. Press the key
repeatedly to go through the characters
until c c is highlighted.
Wait until the character display goes out.
X
The letter c c is entered in the input line.
Character entry (navigation)
Entering characters using the charac-
ter bar
Characters NEW NEW
:
the user
Characters YORK YORK
;
COMAND
c c : press the
(orange-color) entered by
automatically added by
Characters not currently available
=
Currently selected character
?
Characters currently available
A
Character bar
B
The example shows the address entry
( page 60).
Y
To enter a character: turn, slide 6 or
X
5 and press the controller.
Selected character : is entered in the
upper line. COMAND adds the missing
characters and shows the entry that best
matches the current input.
The characters are available A or not =,
depending on the characters already
entered and the data stored in the digital
map.
The G symbol indicates that an entry
exists more than once.
To delete a character: slide 6 and turn
X
the controller, then press it after selecting
F.
To delete an entire entry: slide 6 and
X
turn the controller; then after selecting F
press and hold down the controller until the
entire entry is deleted.
To confirm an entry: slide 6 and turn
X
the controller, then press it after select-
ing¬.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
The location selection list appears. The
selected entry is highlighted.