ATN ThOR-HD 384 2 - 8x User Manual page 20

take the readings (it will take a number of readings so try to keep your weapon
steady);
2. put the arrow-mark under the target and press the EN TER button
3. if satisfied with the value, press the LEFT button
Homescreen, or repeat steps 1 and 2 if necessary.
sets or input the height manually;
• accept the height with EN TER button
20
to go back to the
NOTE
During the measure-
ment process, you can
zoom in and out using
standard buttons (UP
and DOWN).
If the Target Height is in-
correct you can change it:
• press the RIGHT but-
ton to enter the Menu;
• choose one of the pre-
and go back to the Main Screen.
DISTANCE ENTRY
Allows you to input or
correct the distance manu-
ally. To launch, select from
the Shortcuts.
Change distance value
using UP and DOWN but-
tons . To accept the
new distance, press EN-
TER button
;
.