Table of Contents
Advertisement
7
Trouble shooting
Dirty pane
Press the door fully
lower sealing cord.
Check the sealing cord in the door and at the base of the pane for
damage/wear.
Check the moisture content of the wood.
Check that the air vents in the spoilers above and below the window
are blocked.
Burn wood according to the instructions.
Check the corner rubbers for
Check if the tilting mechanism is correctly locked.
Check if the secondary air regulation is in the maximum position to
the right.
Damper is sticking
Check if there is something blocking the damper and remove this, if
necessary.
Check if the flue/ chimney is blocked.
Lifting door moves with difficulty
Clean the
guide.
Check if the door cord is sticking against the surround.
Smoke return
Check if the flue/ chimney is blocked.
Ensure that the flue duct is sufficiently warmed up before opening
the lifting door.
Only burn dry wood.
Reduce or remove the baffle plate.
Check that enough fresh air is being supplied.
downwards,
so it is closing properly against the
wear.
49
7. Trouble shooting
Hide quick links:
Advertisement
Table of Contents
