3.9
Baffle plate
Heat Pure 45
The Heat Pure has a removable baffle plate.
This baffle plate is situated above the smoke
hood just below the heat exchanger. The
baffle plate ensures optimal an combustion.
In the following situations, it may be
necessary to remove the baffle plate(s) or
decrease it's the size.
Bad exhaust of the flue gasses
•
Condensation in the flue duct
•
If necessary, you can adjust the baffle plate
as follows:
1. Remove the baffle plate and see if this
solves the problem. If the problem still
occurs, then something else is the cause.
If removing the plate solves the problem,
proceed with the next step.
2. Use a saw or knife to cut away a strip of 1
cm wide at the front of the baffle plate.
Do not remove too much. The baffle plate
must still be able to rest on the bracket. A
maximum of 6 cm can be cut away from
the baffle plate.
3. In certain situations it may be necessary
to remove the baffle plate
3. Mounting and installation
3. Mounting and installation
completely.
25
Baffle plates
Baffle plates