Mounting And Installation; Check Before Building In/Mounting - KAL-FIRE 45 Installation And User Manual

3

Mounting and installation

Before installing the Heat Pure, ensure that the carrying capacity of the
floor is sufficient for the weight of the appliance and the planned
surround (see Table 5). If this is not the case, this should be first
addressed with the necessary steps (for example, the deviation of the
pressure points using a form-retaining, flame-proof plate).
3.1

Check before building in/mounting

1. Check immediately upon arrival, if the products supplied are
complete and undamaged. Report any damaged or missing items to
the supplier immediately.
2. Remove the transport security (screws with yellow sticker on the
front of the convection casing).
3. Check the following parts for correct working:
- Lifting door up and down
- Forward tilting action of door for cleaning
- Air control
- Adjustment feet
- Any damper with control button (accessories)
- Any aeration valves (accessories)
4. Hand the installation/users manual personally to the user of the Heat
Pure.
5. Test the internal fresh air valve for correct working. This valve is
situated on the rear of the Heat Pure, behind the fresh air
connection. When the door is closed, the fresh air flows into the
combustion chamber via the air slide valve. When the door is
opened, the fresh air flows into the combustion chamber via the
convection casing and outlet openings.
3. Mounting and installation
9