6
Maintenance
6.1
Keeping clean panes
To keep the panes clean:
• Only burn dry wood (with a moisture level of approximately 15% and
stored dry and chopped for 2 years).
• Open the air supply completely (100%).
• Open the damper completely (if present).
• Ensure the flue has a minimum draught of 12 Pa.
REMARKS
• A Heat Pure with a slatted or patterned rear panel is more likely to be
affected by pane pollution than a model with a Skamol rear panel.
• Due to the relatively small surface area of Skamol, the tunnel version
of the Heat Pure 105 is more likely to be affected by pane pollution.
6.2
Cleaning the pane
Before cleaning the glass, allow it to cool
down
completely
damage.
The Heat Pure has a handle which opens
the window. The handle is in the middle,
immediately above the window.
to
prevent
any
45
6. Maintenance