Table of Contents
Advertisement
− Ensure that no detergent fluids makes contact with the sealing
Ensure that no detergent fluids makes contact with the sealing
cords. This will damage the cords!
− Remove persistent soiling by dipping a damp cloth into the
Remove persistent soiling by dipping a damp cloth into the
ash. Rub the glass with the cloth.
− Do not use detergents that contain ammonia. Ammonia will
Do not use detergents that contain ammonia. Ammonia will
damage the sealing cords.
− Ensure that no glowing particles come into contact with the
Ensure that no glowing particles come into contact with the
sealing cord. These will damage the cords.
6.3
Cleaning the grate
Your Heat Pure is suitable for burning dry wood, which burns best in its
Your Heat Pure is suitable for burning dry wood, which burns best in its
own ashes. This combustion leaves very little residual ash (approx. 3 g
own ashes. This combustion leaves very little residual ash (approx. 3 g
per kg wood).
Be careful when you remove the ashes, as they can still glow,
even after 24 hours. Never use a vacuum cleaner without
even after 24 hours. Never use a vacuum cleaner without
special accessories, like the ash-clean.
Make sure that the level of ash does not rise above the spoiler.
Make sure that the level of ash does not rise above the spoiler.
The spoiler is situated in the frame and ensures correct ignition
The spoiler is situated in the frame and ensures correct ignition
of the wood. The opening of the air gauge must never be
of the wood. The opening of the air gauge must never be
obstructed or blocked.
The lower sealing cord must be free of ash, so that the glass is
The lower sealing cord must be free of ash, so that the glass is
able to lay against the sealing cord.
TIP: Ash consists largely of minerals, which can be used as a
Ash consists largely of minerals, which can be used as a fertiliser in
the garden.
as they can still glow,
47
6. Maintenance
6. Maintenance
Hide quick links:
Advertisement
Table of Contents
