Remington MB4045AU Use & Care Manual page 7

• To remove the comb, with the adjustable zoom wheel set to 1, pull the comb
off the beard trimmer.
• For a more detailed, precision stubble look, attach the adjustable stubble
comb which can trim hair between 1 to 5mm. The cutting lengths increase in
0.5 increments.
STUBBLE COMB
Please note that the adjustable zoom wheel does not increase the length set-
tings on the stubble comb. To adjust these length settings, turn the dial found
on the back of the stubble comb which will then indicate the different trimming
lengths to choose from.
NOTE: The below instructions are recommended for those with or wanting
to trim beard hair between 1.5 to 18mm in length.
TO THIN AND TAPER THE BEARD/MOUSTACHE
• Turn the unit on.
• Place the flat top of the trimmer comb against the skin.
• Slowly slide the trimmer through the hair. Repeat from different directions as
necessary.
• If hair builds up in the trimmer comb during the trimming process, switch the
unit off, pull off the comb and brush off.
DETAILING
• To create sharp lines around your beard, remove adjustable comb from
trimmer, then press the pop-up trimmer release button.
• Start with the edge of the beard/moustache line and gently lower the trimmer
blade onto your skin. Use motions towards the edge of the beard/moustache
line to trim to the desired locations in the facial area and away from beard in
neck area.
TRIMMING AND STYLING LONGER BEARDS
• To take out volume from your beard or if you want to reduce the length
significantly, select your desired length setting on the XL comb (please see
the table for trimming length settings). Place the flat top of the trimmer
comb against the skin. Slowly slide through the hair. Repeat from different
directions as necessary.
• If hair builds up in the trimmer comb during the trimming process, switch the
unit off, pull off the comb and brush the hair off.
7