Checking The Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
domain domain-name
The domain view is displayed.
Step 4 Run:
state { active | block }
The status of the domain is set.
When a domain is in blocking state, users that belong to this domain cannot log in. By default,
the domain is in active state after being created.
----End

1.7.7 Checking the Configuration

Prerequisite
The configurations of the domain are complete.
Procedure
l
----End
Example
After the configuration, you can run the display domain command to view the summary of all
domains.
<Quidway> display domain
-----------------------------------------------------------------
Domain name
-----------------------------------------------------------------
default
huawei
-----------------------------------------------------------------
Total 2,2 printed
Run the display domain [ domain-name ] command, and you can view the configuration of a
specified domain.
<Quidway> display domain huawei
Domain-name
Issue 01 (2009-07-28)
Run the display domain [ domain-name ] command to check the configuration of the
domain.
-------------------------------------------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
State CAR Access-limit Online
Active 0
Active 5
: huawei
384 0
300 0
1-31