Configuring Aaa Schemes; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
<Quidway> display local-user
----------------------------------------------------------------------
Username
----------------------------------------------------------------------
crystal
lsj
----------------------------------------------------------------------
Total 2,2 printed
Run the display local-user [ username user-name ] command, and you can view detailed
information about a specified user.
<Quidway> display local-user username lsj
------------------------------------------------------
Username
Password
State
Service-type
ACL-number
User-CAR
Idle-cut
Access-limit
Online-number
MAC-address
User-level
FTP-directory
Call-number
Callback-check
Callback-number
-------------------------------------------------------

1.4 Configuring AAA Schemes

This section describes how to configure an authentication scheme, an authorization scheme, and
a recording scheme on the S9300.

1.4.1 Establishing the Configuration Task

1.4.2 Configuring an Authentication Scheme
1.4.3 Configuring an Authorization Scheme
1.4.4 (Optional) Configuring a Recording Scheme
1.4.5 Checking the Configuration
1.4.1 Establishing the Configuration Task
Applicable Environment
By configuring authentication and authorization schemes, you can perform authentication and
authorization for the user that logs in to the S9300 and prevent unauthorized users from accessing
the S9300. You can also configure a recording policy to record user operations. This helps the
user monitor the device and locate faults.
Issue 01 (2009-07-28)
: lsj
: 123
: Active
: telnet
: -
: -
: Yes
: 30
: 0
: -
: 15
: -
: -
: Yes
: -
NOTE
Currently, the S9300 does not support user accounting.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
State Type CAR
Active F Dft
Active T Dft
Access-limit Online
20 0
30 0
1-9