Configuring An Authentication Scheme - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
Pre-configuration Tasks
None
Data Preparation
To configure AAA schemes, you need the following data.
No.
1
2
3

1.4.2 Configuring an Authentication Scheme

Context
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
authentication-scheme authentication-scheme-name
An authentication scheme is created and the authentication scheme view is displayed.
1-10
NOTE
By default, the local authentication mode is used. If users are not authenticated, you must create an
authentication scheme or modify the default authentication scheme by setting the authentication mode to
none. Then, you apply this authentication scheme to the domain that users belong to.
You need to set the authentication modes for a user logging in to the S9300 and upgrading user levels
separately.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Data
Name of the authentication scheme and
authentication mode
Name of the authorization scheme,
authorization mode, (optional) user level in
command-line-based authorization mode on
the HWTACACS server, and (optional)
timeout interval for command-line-based
authorization
(Optional) Name of the recording scheme,
name of the HWTACACS server template
associated with the recording scheme, and
recording policy used to record events
Issue 01 (2009-07-28)