Ip401 Expansion And Installation Of Integral Modules - Avaya IP Office Phone Installation Manual

Installing a New System

IP401 Expansion and Installation of Integral Modules

An IP401 Compact Office 2 can be expanded to an IP401 Compact Office 4. Either unit
can be expanded with a WAN card. In addition, either or both an optional Voice
Compression Module (VCM) and/or a VME module (providing memory capacity for
embedded voice mail) can be fitted.
Procedure:
1. To add a VME memory card you do not need to de-assemble a module, simply insert
the VME memory card (item
position (item
2. Remove the top cover (item
screws (two either side - items
3. To expand an IP401 Compact Office 2 to an IP Compact Office 4:
- Remove and discard the front panel (item
- Remove the rear panel (item
Only discard if a WAN module is being fitted (see below).
- On the rear panel, press out the molding for the additional
BRI RJ45 socket (item
- Plug the expansion board (item
Ensure that the additional BRI RJ45 socket slots into the hole in the rear panel
(item
- Mount the new front and existing rear panels if a WAN Module is not being fitted.
If a WAN module is being fitted, see below.
4. To add a WAN module:
- Remove and discard the rear panel (item
- Fit the new rear panel (with slot for WAN port 27-way D-type, items
- Mount WAN Module (item
5. To add a Voice Compression Module (VCM5):
- Mount the VCM Module (item
- Secure with the two snap-in spacers.
CAUTION: While installing modules, ensure that you wear aground wrist strap that is
IP Office Installation Manual
40DHB0002USCL – Issue 9 (28th October 2003)
) into the slot in the rear panel below the WAN port
).
) from the base cover by removing the four retaining
).
). Secure the expansion board (item
) in position and secure with the two snap-in spacers.
connected to a suitable grounding point.
IP401 Expansion and Installation of Integral Modules - Page 45
) and proceed as follows.
).
).
) onto it's sockets and stand-off hex. pillars.
) with the three retaining screws.
).
) in position
IP401 Expansion and Installation of Integral Modules
and ).
Installing a New System - Page 45