X.21 Wan Cable - Avaya IP Office Phone Installation Manual

Technical Data

X.21 WAN Cable

SAP Code:-
A 37 Way D-Type Plug with UNC 4-40 locking screws.
B 15 Way D-Type Plug with M3 locking screws.
C Label
D 6 twisted pair screened cable - each core is 7/0.203mm (24 AWG) tinned copper
stranded wire, nominal capacitance of 98pF/m, impedance of 77 Ω at 1MHz, screened
with aluminized tape and a tinned copper wire drain.
E 3 meters/9.84ft.
Pin Connections
End A
1
20
4
23
24
5
2
21
3
22
6
Connect pin 7 to pin 6 at End A only.
Pin 19 at end A is connected to the Screened Cable Drain Wire.
This cable is used to connect a WAN port to a Digital leased Line.
IP Office Installation Manual
40DHB0002USCL – Issue 9 (28th October 2003)
700213408
A
C
Name
Receive (Rx-B)
Receive (Rx-A)
Transmit (Tx-A)
Transmit (Tx-B)
Control (Ctl-A)
Control (Ctl-B)
Indicate (Ind-A)
Indicate (Ind-B)
SE-Timing (S-A)
SE-Timing (S-B)
Ground
D
E
Cable Notes
Twisted Pair
Twisted Pair
Twisted Pair
Twisted Pair
Twisted Pair
------
Cables - Page 75
B
End B
11
4
2
9
3
10
5
12
6
13
8
Technical Data - Page 75
Cables