Configuration Parameters
November 2017
Mounting type
Select option best describing how transmitter is mounted on the tank. There are four options to choose
from: Nozzle, Still pipe, Chamber, and Bracket.
Figure C-6. Mounting Type
A.
Nozzle
B.
Still pipe
C.
Chamber
D.
Bracket (open air)
Inner diameter, pipe/chamber
Enter the inner diameter for the pipe or chamber in which the antenna is mounted. The inner diameter
value is used to compensate for the lower microwave propagation speed inside the pipe/chamber. An
incorrect value will give a scale factor error.
Tank shape
Select a tank shape that corresponds to the actual tank. If the actual tank does not match one of the
pre-defined tank shapes, then select Other (e.g. level measurements of sumps, basins, or ponds).
Tank top shape
Form of the upper tank closure.
Figure C-7. Tank Top Shape
A.
Dome
B.
Flat
C.
Conical
Tank bottom shape
Form of the lower tank closure.
192
A
B
A
B
C
C
Reference Manual
00809-0100-4408, Rev BA
D
Configuration Parameters